The Parker PWO is a compact and lightweight Water Oil Cooler (also known as a brazed plate heat exchanger) with a high cooling capacity for its size. Please use the PWO Sizing Software on the Product Support Tab for proper cooler sizing.
Medium- and high-speed reciprocating internal combustion engines are most commonly equipped with a brazed plate heat exchanger (BPHE) oil coolers, though older technologies such as Shell & Tube are still used in some markets. Open circuit plate-type heat exchangers mounted internally in the engine block are also relatively common in high-speed PWO Water/oil cooler - Arvihitechhe Parker PWO is a compact and lightweight water/oil cooler with a high cooling capacity for its size. he cooling elements consist of corrugated channel plates sandwiched between the front and rear cover plates. he channel plates are pressed and vacuum brazed in the same automated procedure, with rigorous standards of quality control. he unique plate design provides a highly turbulent low throughout the cooler
Classic plate brazed heat exchanger for small loads, also suitable as a condenser, or for smaller stations, hot water heating, oil cooler, etc. Power 20 to 60 kW . Recommended max. flow 1):3 m 3 /h:Brazing material:copper:Model version:plate exchanger from stainless steel (AISI 316) Dimensions (H × W × D):289 × 119 × 55 mm:Related PWO Water/oil cooler - Parker HannifinA plate water/oil cooler range to suit all needs The PWO standard range of water oil coolers is available in a wide number of sizes and is in general available for immediate off-the-shelf delivery. The basic material is stainless steel (AISI 316/304), vacuum brazed with pure copper. AISI 316 can be lim-ited to the parts of the PWO that
Your email address will not be published.*